top of page

Extra Life Poly 2

Alternative to AMBLYGON TA 15/2, Urethyn MP-2 Grease Cartridges 400g

Description

Extra Life Poly 2 is a polyurea thickened lubricating grease based on mineral oil and polymer. The grease contains antioxidants, corrosion inhibitors, and EP/AW additives. The thickener, together with the special base oil blend, makes the product suitable for the lubrication of lightly loaded bearings operating at medium to high speeds, at a wide temperature range. The combination of the polyurea thickener and the antioxidant additives gives a potent and durable protection against thermal degradation. Extra Life Poly 2 is especially developed for lubrication of bearings in electrical motors and applications operating under similar conditions. The product is designed to ensure long life for rolling bearings, even in conditions where severe temperatures and humidity may be present.

Outstanding Features

  • Extends lubrication intervals ensuring maximum cost savings in grease consumption
  • Highly water resistance and corrosion protection.
  • Excellent EP performance provides protection against premature wear
  • Highly versatile grease with a wide temperature range.

 

Directions for Use

Extra Life Poly 2 can be applied by hand, or by using a standard grease gun or via a central lubricating system designed for and capable of pumping an NLGI No.2 grease. As with all greases used for the first time, check compatibility with the grease applied previously and if necessary purge bearings prior to application. Take care not to over-lubricate and apply the quantity of grease recommended by the bearing manufacturer.

 

Extra Life Poly 2

A classificação é 0.0 de 5 estrelas com base nas avaliações
£30,00Preço
  • Technical Data 

    Colour       - Light brown  Thickener, soap type     - Urea compound  Base oil nature     - Mineral  Base oil Viscosity @ 40C   - 220 cSt          @ 100C   - 20 cSt  NLGI Consistency class    - Grade 2  Worked penetration 60 W, (0,1mm)   - 265 – 295  Worked penetration 105 W, (0,1mm)  - Max. 350  Drop point, (ºC)     - 250  EMCOR corrosion test    _distilled water  - 0    _salt water   - Max 2  4-ball-test   Welding load, (kg)   - Min 300   wear scar diameter 1h/40 kg, (mm) - Max.0.50  Oil separation, %     - Max. 6  Water washout, 80ºC, (%)    - Max. 2  Oxidation stability, (bar)    - Max. 0,5  Copper corrosion 100ºC    - Max. 1 b  Operating temperature, (ºC)    - -20 to 150

    The content of this data sheet is given in good faith but without warranty.

Ainda não há avaliaçõesCompartilhe sua opinião. Seja o primeiro a deixar uma avaliação.
bottom of page